.
.
.
.
.
.
.
.
.
.
.
.
.
1. Ip address setting
/ip address
add address=192.168.0.254/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local comment=”Link to Local Lan” disabled=no
add address=192.168.1.2/24 network=192.168.1.0 broadcast=192.168.255 interface=speedy1 comment=”Link to Modem 1″ disabled=no
add address=192.168.2.2/24 network=192.168.2.0 broadcast=192.168.2.255 interface=speedy2 comment=”Link to Modem 2″ disabled=no
2. Manggle setting for NTH concept and packet mark
/ip firewall mangle
add chain=prerouting in-interface=Local connection-state=new nth=1,2,0 action=mark-connection new-connection-mark=link1 passthrough=yes comment=”Mark Nth for link 1″ disabled=no
add chain=prerouting in-interface=Local connection-mark=link1 action=mark-routing new-routing-mark=link1 passthrough=no comment=”” disabled=no
add chain=prerouting in-interface=Local connection-state=new nth=1,2,1 action=mark-connection new-connection-mark=link2 passthrough=yes comment=”Mark Nth for link 1″ disabled=no
add chain=prerouting in-interface=Local connection-mark=link2 action=mark-routing new-routing-mark=link2 passthrough=no comment=”” disabled=no
3. Nat tables for Link1 and link 2
/ip firewall nat
add chain=srcnat connection-mark=link1 action=src-nat to-addresses=192.168.1.2 to-ports=0-65535 comment=”Masquee Nat Link 1″ disabled=no
add chain=srcnat connection-mark=link2 action=src-nat to-addresses=192.168.2.2 to-ports=0-65535 comment=”Masquee Nat Link 2″ disabled=no
4. Ip routing for link 1 and 2
/ ip route
add dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=255 target-scope=10 routing-mark=link1 comment=”Link To modem1″ disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.2.2 scope=255 target-scope=10 routing-mark=link2 comment=”Link To modem1″ disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.2.2 scope=255 target-scope=10 comment=”Default routing” disabled=no <<– this default routing simple configuration load balancing.
langsung di sedot aja ya, artikelnya....
Download 1
Download 2
0 komentar:
Posting Komentar